Visual Artificial Insemination Gun Sheep Kit Camera 360° Adjustable Screen NEW

  

Visual Artificial Insemination Gun Sheep Kit Camera 360° Adjustable Screen NEW. This Sheep Visual Insemination Gun Adopts a Smooth Metal Expansion Head and a Rotating Screen, Which Can Easily Watch the Insemination Process. The Insemination Channel Adopts a High-definition Micro Focus Camera and High-level Anti-corrosion and Waterproof Treatment, Which Makes It Easier to Use. Length of Expansion Head: 12mm.

Diameter of Expansion Head: 18, Mm. Rotation Angle: 120 ° up and down, 360 ° Left and Right. Fine Tube Insemination Gun: 46cm. Outer Casing of Insemination Gun: 44cm. Application: Artificial Insemination of Sheep.

The Display Screen Can Be Rotated up and down 120 °, Left and Right 360 °, so As to Easily Watch the Process of Insemination. Ultra HD Screen Is Selected, and the Display Screen Can Be Compatible with Strong Light, Dark, Cold, Dry, Hot and Humid Working Environment. The Air Passage Is Designed to Blow Away the Water Vapor Caused by Temperature Difference or the Mucus on the Camera. Video Recording, Photographing, Playback, Image Amplification, Image Output and Printing, and Clearly Record Every Moment.

The Battery Body Is Separated, Replaceable, More Convenient and More Comfortable to Use. 1x Constant Temperature Data Line. 1x 46cm Fine Tube Insemination Gun. 20x 44cm Insemination Gun Outer Tubes.

5x 41cm Metal Insemination Needles. 20x 43cm Disposable Vas Deferens. 1 Wipe the Probe and Probe Rod of the Visual Insemination Gun with an Alcohol Cotton Ball. Clean the Sheep's Vulva, and the Body Is in an Inverted or Semi Inverted State.

Insert the Probe Rod of the Visual Insemination Gun into the Reproductive Tract, and Observe the Effect by Changing the Insertion Edge. After Inserting It to the Bottom, If the Screen Is Blurred, You Can Slowly Back up the Insemination Gun. If the Camera Is Blocked by a Small Amount of Mucus, You Can Press the Pneumatic Button of the Handle to Blow off the Shielding of the Camera. 4 Insert the Insemination Needle or Disposable Vas Deferens from the Rear End of the Visual Gun, Observe the Change of the Display, and Fine Tune the Direction to Let the Insemination Needle Enter from the Fold Gap of the Uterus, About 4cm. Connect the Syringe Containing Semen with the Metal Insemination Needle or Disposable Vas Deferens, Push It into the Uterus, and Finally Withdraw the Visual Insemination Gun.

1 Wipe the Probe and Probe Rod of the Visual Insemination Gun with an Alcohol Cotton Swab. 2 Thaw the Fine Tube, Install the Front Section of the Snap Ring Insemination Gun, and Sleeve the Outer Insemination Sleeve. Detailed Explanation: Pull out the Inner Core of the Circlip Insemination Gun for About 10cm, Thaw the Thin Tube at 38? For 15 Seconds, Insert the Part of the Thin Tube with Cotton Plug into the Front of the Circlip Insemination Gun, Cut off the Gas Part at the Upper End with Thin Tube Scissors, and Put It into the Outer Casing of Insemination. Clean the Sheep's Vulva, Put the Body in an Inverted or Semi Inverted State, and Insert the Probe Rod of the Visual Insemination Gun into the Reproductive Tract.

4 Put the Thawed Frozen Fine Tube into the Insemination Gun in the Traditional Way, and Put It into the Supporting Outer Tube for Standby. 5 See the Position of the Uterine Orifice, Insert the Circlip Insemination Gun from the Rear End of the Visual Insemination Gun, Observe the Change of the Display, Fine Tune the Direction, and Let the Circlip Insemination Gun Enter from the Fold Gap of the Uterus, About 2-3cm. 6 Push the Semen of the Circlip Insemination Gun into the Uterus, Which Is Enough to Withdraw the Visual Insemination Gun at the Same Time. If You Find There Is a Lot of Effusion in the Sheep, Extract It with Needle Before Inseminiation. It Is a Normal Phenomenon That the Semen Spills out After a Lot of Insemination, Because the Volume of Uterus Is Limited, About 2-4ml.

Back off the Insemination Gun If the Effusion or Semen Cover the Camera During the Insemination Process and Press the Air Channels Switch to Clean the Camera. Due to the Lighting Effect of the Product, the Picture Color Is Slightly Different from the Real Object. Please Allow an Error of 1-3cm Due to Manual Measurement.

Please Do Not Hesitate to Contact Our Customer Service If You Have Any Problems During the Installation and Use of the Product. Feedback is very important to us. It is impossible to address issues if we do not know about them!

Faction is our ultimate goal. We work hard to earn your trust and future business.

A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday. 120 ° Up And Down, 360 ° Left And Right.

This item is in the category "Business & Industrial\Agriculture & Forestry\Livestock Supplies\Sheep & Goat". The seller is "rotarytattoo" and is located in this country: US. This item can be shipped to United States.

1. Brand: Unbranded
2. Type: Artificial Insemination Kits
3. Probe Rod Length: 250mm
4. Probe Rod Diameter: 16mm
5. Camera Diameter: 3.9mm
6. Insemination Channel: 6mm
7. Screen Pixels: 15 Million
8. Rotation Angle: 120 ° Up And Down, 360 ° Left And Right
9. Battery Capacity: 2000ma
10. Input Current: 2A
11. Input Voltage: 5V
12. Operating Temperature: - 10 ℃ --- 50 ℃
13. Operating Humidity: 15-85%
14. Application: Artificial Insemination Of Sheep
15. Length Of Expansion Head: 12mm
16. Handle Length: 80mm
17. Total Length: 340mm
18. Feature: Ultra HD Screen