Longfield Toyota Land Cruiser 80 Series Gun Drilled 24-Spline Super Set

Longfield&#####x2122; Toyota Land Cruiser 80 Series Gun Drilled 24-Spline Super Set. The Longfield&#####x2122; FJ80 Gun Drilled 24-Spline CVs are made out of 100% chromoly and are precision polished to remove any imperfections that may cause stress risers. The internals of the CV are also made from 4340 chromoly and are dual heat treated for superior strength. The CV has a M8 grease nipple at the end of the stub shaft and is gun drilled through the center of the CV to allow for grease to pass through the nipple fitting and into the internals.

This will save you precious time by eliminating the need to disassemble your axle just to service your CVs. The FJ80 Gun Drilled 24-Spline CVs also have a shallow relief near the splines on the stub shaft known as a Machined Spline Saver. The Machined Spline Saver eliminates stress concentrations caused by grooving from the tool that makes the splines on the stub shaft.

The stress concentration from the spline groove is a common failure point on CV stub shafts. The stub shaft of the CV has dual snap ring grooves to accommodate FJ80s with short and long drive flanges. The axle shafts are also made out of 4340 chromoly. Included in this kit is a set of new FJ80 ABS Tone Rings.

This will allow you to install the Longfield&#####x2122; FJ80 Gun Drilled 24-Spline Super Set on both ABS and Non-ABS FJ80 applications. No other kit on the market can compare.

Made out of 100% chromoly and are precision polished to remove any imperfections that may cause stress risers. CV housing is made out of forged 4340 chromoly steel. CV stub shaft has dual snap ring grooves to accommodate FJ80s with short and long drive flanges.

Internals of our Longfield&#####x2122; CVs are made out of 4340 chromoly steel and then dual heat-treated for superior strength. Machined spline saver to eliminate stress concentrations from the spline groove. Gun drilled to create grease passage through the CV. M8 grease nipple at the end of stub shaft for easy greasing of the CV.

Includes FJ80 ABS Tone Ring. Includes extended drive flange dust caps. The axle shafts are also made out of 4340 chromoly steel. Items over 2kgs generally go with a carrier on a 1-2&#######xA0;day service. We also revere the right to contact you in relation to oversized parcels needing an additional charge.

There is an option of tracking but this is an extra cost that must be picked during checkout. &#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B. Return posting costs will be at your expense. Any timed or lifetime guarantee, covers original purchaser only and is non transferable, does not cover paint finish. Please check this listing page carefully as the answer is usually there.

Please note due to the high demand for technical questions there can be a delay on questions upto 3 days. The LongfieldT FJ80 Gun Drilled 24-Spline CVs are made out of 100% chromoly and are precision polished to remove any imperfections that may cause stress risers. This will allow you to install the LongfieldT FJ80 Gun Drilled 24-Spline Super Set on both ABS and Non-ABS FJ80 applications. Specifications: Made out of 100% chromoly and are precision polished to remove any imperfections that may cause stress risers.

Internals of our LongfieldT CVs are made out of 4340 chromoly steel and then dual heat-treated for superior strength. The item "Longfield Toyota Land Cruiser 80 Series Gun Drilled 24-Spline Super Set" is in sale since Thursday, January 10, 2019. This item is in the category "Vehicle Parts & Accessories\Car Parts\Suspension & Steering\Bearings, Bushings & Bush Kits". The seller is "jimnybits" and is located in Stoke-on-Trent.

This item can be shipped worldwide.

Manufacturer Part Number: 301712-1-KIT
Country/Region of Manufacture: United Kingdom
Brand: Trail Gear