X-Tronic 5040-XR3 Soldering Iron Station Kit, Hot Air, & and Preheating Station

  
The X-Tronic ALL-IN-ONE Model 5040-XR3 Hot Air Rework Soldering Station & Preheating Station is a USA EXCLUSIVE product. In Late 2016 we changed the Hot Air Gun to a Plug In instead of being Hard Wired and also added a PID Controller to the unit which is explained below.

The All-In-One X-Tronic Model #5040-XR3 Fully Digital (ESD Safe) Hot Air Rework Soldering Station & Preheating Station. This unit features a 60 Watt Soldering Iron, a 500 Watt Hot Air Gun and a Preheating Station All-In-One. The Soldering Iron and the Hot Air Gun are both Detachable (Not Hard Wired) to this unit. You can easily change the LED readouts from Centigrade to Fahrenheit for the Soldering Iron & Hot Air Temperatures with the push of a button.

This unit Also Features a PID (Proportional-Integral-Derivative) Controller often referred to as Magic Temperature Control Technology which this program will cycle every 20 milliseconds to detect the actual temperature of the soldering iron's heating element, quickly correct it with a rapid return to the correct set temperature. This unit also has a Self-Test function with full intelligence on over-temps, short-circuits and overloads.

This has a 12" Gooseneck, an Ultra Bright Daylight 13 Watt Circular Bulb and a 3.5" Diameter 5x Viewing Area with a 15x Detail Magnifier. All X-Tronic Products come with a.

The X-Tronic 5040-XR3 Model features a telescopic, fully adjustable, over arm hot air bracket. You can insert the hot air gun and adjust it to a height of up to 7.00 Inches above the bed. The heat bed of the unit measures 4.75" x 4.75" and the circuit board brackets will hold a board up to 6.50 wide. Included is an X-Tronic 60 Watt Total Power Output Soldering Iron with a. 54 Inch SILICONE CORD (60 Inches from the Tip of the Soldering Iron to the Plug).

These new silicone cords are extremely pliable and virtually have NO MEMORY! The ceramic heating element and sensor in our soldering irons ensure a very rapid heat-up temperature and fast thermal recovery.

The soldering iron is padded and has an ergonomic design for extreme comfort and ease of use. The Hot Air Gun is 500 Watts and can accept many different sizes of hot air nozzles.

The dimensions of the hot air nozzles included with the unit are as follows: 2.5mm (0.09") round, 4.4mm (0.17") round, 7.0 mm. 35" round and 12mm (0.48") square. You will also appreciate that the Hot Air Gun on this unit has an all new protective feature. If you are in the process of using the hot air gun and the air flow stops for any reason, the heating element in the gun will stop heating so as to prevent damage to the hot air gun, thus enhancing the safety performance of this product. Also included is an Anti-Static/Anti-Magnetic Pinpoint Tweezers, an IC Popper and a Roll of Gootwick. Model: X-Tronic 5000 Series - Model #5040-XR3. PID Programmable Temperature Control Technology (Magic Temp Technology). Total Power Consumption: 1270 Watts. Hot Air Gun Type: Brushless Fan.

Hot Air Gun: 500 Watts - Temperature Range 212. C with Auto Cool Down Safety Feature.

Hot Air Gun Air Flow: 28 L/Min. Hot Air Gun Temperature Stability. Hot Air Gun Tube Material: 100% Silicone (Virtually No Memory). Soldering Iron: 60 Watts Total Power Output - Temperature Range 392.

C - Cord Length: 56.0 In. Soldering Iron Cord Material: 100% Silicone (Virtually No Memory). Preheating Station Telescopic Adjustment Arm: Up to 7.00. Preheating Station Heating Bed Size: 4.75" x 4.75". Preheating Station Circuit Board Bracket Size: Holds a circuit board up to 6.50 Wide.

Preheating Station Temperature Range: 122. Working Environment of unit: 0. Storage Environment of unit: -68. Product Dimensions of unit: 7.40"W x 5.75"H x 9.80D. Actual Unit Weight: 15 Lbs.

110/120V - 60 Hz (NO 220V units available). Products come with 3-Year Guarantee, valid only in the 48 Contiguous United States. This Guarantee covers the main unit itself.

Consumable parts such as soldering tips, heating elements. Are not covered by this guarantee. The remainder of the 3 Years (after the first 30 days) is covered by a FREE REPAIR Guarantee (parts and labor included).