DevilBiss StartingLine 802342 Automotive Painting and Touch Up Spray Gun Kit

  
DeVilbiss StartingLine 802342 HVLP Automotive Painting and Touch Up Spray Gun Kit. The DeVilbiss StartingLine HVLP gravity feed paint spray gun kit includes a 1.3mm fluid tip and a 600cc aluminum cup. The 1.3mm setup is ideal for the atomization of base coats, clear coats, and other light-viscosity coatings. The other gun features a 1.0mm fluid tip and a 250cc plastic cup.

The 1.0mm setup is suitable for spot repairs using a variety of coatings. The DeVilbiss StartingLine HVLP gravity feed paint spray gun kits include a gun-cleaning brush set, a gun maintenance wrench, an air regulator with a gauge, and a blow-molded carrying case.

Full-size gun with 1.3 mm fluid tip (plus 1.8 mm primer option) - optimized for base coat, clear coat and light-viscosity automotive materials. Mini detail gun with 1.0 mm fluid tip - suitable for spot repairs and tight areas requiring high precision. Gravity feed design with 600 cc (? 20 oz) cup on full-size gun and 250 cc (? 8.5 oz) cup on detail gun - supports efficient material use and quick change-overs.

Includes air adjusting valve with gauge, cleaning brushes, wrench and molded carry case - provides a complete package for a professional refinish setup. (1) Finish Coat and Primer Gun. (1) 1.3/1/1.8 Fluid Tip. (1) 600 Cubic Centimeter Cup. (1) 250 Cubic Centimeter Cup.

(1) Air Adjusting Valve with Gauge. Inlet Size: 1/4 Inch NPS. Air Cap Pressure: 10 PSI. The DeVilbiss StartingLine 802342 kit can also be referred to as DeVilbiss StartingLine finish/primer/touch-up gun kit, DeVilbiss 2-piece automotive HVLP gun kit 802342, DeVilbiss StartingLine two-gun system, and StartingLine HVLP spray gun kit full-size + detail.

DeVilbiss's StartingLine 802342 kit provides a versatile and professional-level spray gun system for automotive body repair and refinishing work. With both a full-size and a detail gun included, technicians can handle large panel work and small repairs with a single coordinated kit. The gravity-feed HVLP design offers efficient material use, reduced overspray and smoother finishes when properly set up. Q: What air compressor specifications are required for this kit? A: For the full-size gun, supply 30 psi inlet pressure (to deliver 10 psi at the air cap) and approximately 13 CFM air volume.

For the detail gun, similar inlet pressure and approximately 8 CFM. Use air hose with at least 5/16' internal diameter or larger for optimal performance.

Q: Can this kit handle both base coat/clear coat and primer work? The full-size gun includes a 1.8 mm fluid tip option designed for primer application. The 1.3 mm tip is suited for base and clear coatings, and the detail gun's 1.0 mm tip is ideal for spot-repair work. Q: Is this kit suitable for hobbyists or professional shops? A: Yes - while the kit is priced for cost-effectiveness, it includes professional features and accessories that make it appropriate for both serious hobbyists and smaller body-shop applications when paired with a suitably sized compressor and proper setup.