Eastwood HotCoat PCS-250 Powder Coating System and Benchtop Oven Kit

  

The Eastwood PCS-250 Dual-Voltage HotCoatT Powder Coating Gun gives you complete coverage from tight areas to large surfaces while operating on standard 120v household current. This innovative system will allow you to achieve the benefits of powder coating small parts instead of coating them with paint.

This new and improved dual-voltage system gives you the capability to coat small areas using the low 15kv setting or coat large areas using the high-voltage setting 25kv. All you need is a compressed air source (5-10 PSI from a portable tank with a regulator or a compressor) to power your gun, an electric oven or toaster oven to cure the finish and a well-ventilated workspace in which to do your coating.

This new and improved gun features color-coded cabling, larger ground clamp, increased trigger room and a clear bottle so you can see the powder color and fluidizing action. Coat and cure in under an hour! Operates on standard 120v / 60Hz household current.

Versatility with two settings for improved coverage. High 25,000-volt setting for multi-coat coverage over larger areas. Color-Coded cables for easy setup. More trigger-room for additional comfort. Clear bottle allows you to see powder color, level and fluidizing action. Larger internal passages for improved powder flow.

Refined power supply for more consistent coverage and powder-build. Hotcoat Benchtop Powder Coating Oven.

The Eastwood Hotcoat Benchtop Powder Coating Oven combines generous internal volume in a convenient, compact package with big oven features. Ideal Oven for Small to Mid-Size Powder Coating Projects. Compact Design Easily Stores Under a Bench and is Ready When You Need It. Heats Up Fast With Upper and Lower Heating Elements. Air Circulation Fan Allow Optimum Control of Heat Distribution.

Built-In Timer for the Desired Cure Time. This oven has selectable upper and lower Heating Elements, and air Circulation Fan allow optimum control of heat distribution inside the Oven.

The Oven Door window presents a convenient view of parts during the critical "flow-out" stage, enabling proper setting of the built-in Timer for the desired cure time. Couple this oven with any of Eastwood's HotCoat Powder Coating Guns and start coating brackets, housings, and other small to medium-sized parts right in your home shop or garage. 15KV/25KV dual voltage output New and improved ground clamp provides a better ground Color coordinated cabling for easier setup New clear bottle makes it easy to see powder level and fluidizing action Additional 1/2 of trigger room makes it easier and more comfortable to use.

(1) PCS-250 Dual-Voltage HotCoat Powder Coating Gun (1) Dual-Voltage Power Supply (1) Activation Switch (1) Ground Clamp and Cable (1) Empty 8 Ounce Bottle (1) Eastwood HotCoat BenchTop Powder Coating Oven (1) Oven Rack.