3M PPS Standard Spray Gun Paint Cup Lids & Liners Kit with 125 Micron Filter 16301

  

3M PPS Standard Spray Gun Paint Cup Lids & Liners Kit w/ 125 Micron Filter 16301. PPST is a complete painting system from 3MT which produces cleaner jobs, saves on solvent usage and gun cleaning time and can improve operator efficiency by as much as 15%. Specifically designed adapters allow painters to use the PPST system with virtually any spray gun. PPST replaces traditional mixing cups and filters and drastically reduces the amount of solvent required for gun cleaning. The liner, lid and built-in filter are all disposable, leaving only the adapter and spray gun to be cleaned.

It is possible to clean your paint gun with as little as 3 ounces of solvent. With these disposable parts, shops can see a 70% savings in cleaning solvent use -- meaning less operator exposure to solvents and reduction in VOCs.

Since PPST uses the same cup for mixing and spraying, there less risk of outside contamination, less time spend mixing and cleaning. With PPST your spray gun functions at any angle Many painters mix more paint than they need to reduce the chance of starving the gun. PPST allows painter's to spray at any angle without starving the paint gun. 125 micron filters (full diameter). Graduated measurement to 20.3 oz/600 mL (with mix ratio film insert).

Maximum capacity of 25 oz/750 mL when filled to within 1/8 of rim. Use with 3M Standard Mixing Cups and Collars - 16001. Auto Body Toolmart has been serving the Automotive Industry for over 30 years. This item is in the category "eBay Motors\Automotive Tools & Supplies\Air Tools\Spray Guns".

The seller is "autobodytoolmart" and is located in this country: US.

1. Modified Item: No
2. Custom Bundle: No
3. Type: Cup Spray Gun
4. Manufacturer Part Number: 16301
5. Brand: 3M
6. Set or Single Item: Set
7. Non-Domestic Product: No
8. Liners: 50
9. Lids: 50
10. Sealing Plugs: 20
11. Filters: 125 Micron
12. UPC: 0051131163010