WEP-948 2in 1Pro Soldering Iron Desoldering Rework Station Vacuum Pump Gun Kit

  
The station will preheat for approximately 5 minutes when turned ON, and beep three times when the station is ready-to-go. Pulling the desoldering trigger during preheating will trigger protection code'Pht'. The vacuum pump is turned OFF by default during preheating. So, your 948 desoldering gun won't clog up due to misuse under insufficient heating. This function allows the station heats the internal desoldering mechanism sufficiently to provide better heat transfer and quicker recovery time. What's in the box? 1 x YH-948 2 in 1 Soldering & Desoldering Station 1 x YH-948 Soldering Iron with Silicone Cord 1 x YH-948 Desoldering Suction Gun with Silicone Cord 1 x Holder 4 x Desoldering Gun Nozzles 2 x Sets of Cleaning pins 1 x Silicone Pad 1 x Ceramic Filters 2 x Filers Pipe. WEP-948 2in 1Pro Soldering Iron Desoldering Rework Station Vacuum Pump Gun Kit. Desoldering Soldering Station Vacuum Gun Soldering Iron 2in1 WEP-948 ESD Safe. One Unit, Two Tools - A Good Combination of Desoldering Station(80 watt high power) and Soldering Station (60 watt). Intelligent Heat Control - Upgraded with Precision PID Temperature Control.

The program can track the actual temperatures of both desoldering gun and soldering iron rapidly. The compensation speed is vastly superior to similar products. This allows for minimal temperature error to achieve the essential stability. Intelligent Detection Mechanism - The station can detect the part's status or change and send you the information. Automatic identification aside, the machine provides messages like "S-E" (meaning the sensor part is faulty), "Pht"(indicating the station is preheating the gun properly).

Coupled with available replacement, you can keep track of its status or give it a timely resolution. User-Friendly Design Features - Sleep Function; Automatic Shutdown; Digital Temperature Correction; Celsius/Fahrenheit Display. The New Upgraded WEP-948 Professional Soldering & Desoldering Station!

How to use the 948 desoldering station. 1 x WEP-948 2 in 1 Soldering & Desoldering Station. 1 x WEP-948 Soldering Iron with Silicone Cord. 1 x WEP-948 Desoldering Suction Gun with Silicone Cord. 2 x Desoldering Gun Nozzles.

2 x Sets of Cleaning pins. Suction Gun: 80W - Temp. Solder Iron: 60W - Temp. Pump Vacuum Pressure: 0.05MPa (375mmHg). NOTE:The soldering iron and the solder extractor can't be used at the same time. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday. Creative Design, Durable Material, Beautiful Appearance. Do not send to Brazil.