Power Custom Series I 1911 Stoning Fixture Tool for Gunsmith Trigger Jobs Kit

  
Grand Master® 1911 Sear Primary & Secondary Angle & Hammer Secondary angle Fixture Tool Jig for Gunsmith Trigger Job. Grand Master® Browning Hi Power Hammer Sear Fixture Tool Jig for Gunsmith Trigger Job. (This Fixture will include the 1911 Adapter along with a Fine and Medium Stone)This fixture allows modification of the angle to give the precise trigger pull desired. It uses special adapters that allow positioning of the sear or hammer at a precise angle. Once the part is in position, an Arkansas or India stone is set on top of the included roller guide to stone the mating surfaces on the hammer or sear for a lighter, crisper trigger pull. As an added bonus, the fixture is drilled to hold six of the most common hammer and sear pins in the same alignment as they are in the gun allowing the gunsmith to check sear engagement outside of the firearm. For best results, a small clamp can be used to hold the part against the fixture. Package includes fixture, allen screw, two thin metal pins, one thick metal pin, Thin pins are inserted into the top of the guide roller, the thick pin is inserted into one of two holes toward the left side of the fixture at the top. 1- Fine 6" x 6" x 1 Stone. 1- Medium 6" x 6" x 1 Stone. 1- Series I Stoning Fixture w/roller, 2 guide pins for the Stone, Allen wrench, 1/2 x 1 allen screw for the Adapter to fit on the fixture.