Eastwood PCS-250 Dual Voltage Powder Coating Gun Starter Kit

  
Eastwood PCS-250 Dual Voltage Powder Coating Gun. The Eastwood PCS-250 Dual-Voltage HotCoatT Powder Coating Gun gives you complete coverage from tight areas to large surfaces while operating on standard 120v household current. This innovative system will allow you to achieve the benefits of powder coating small parts instead of coating them with paint. This new and improved dual-voltage system gives you the capability to coat small areas using the low 15kv setting or coat large areas using the high-voltage setting 25kv. All you need is a compressed air source (5-10 PSI from a portable tank with a regulator or a compressor) to power your gun, an electric oven or toaster oven to cure the finish and a well-ventilated workspace in which to do your coating. This new and improved gun features color-coded cabling, larger ground clamp, increased trigger room and a clear bottle so you can see the powder color and fluidizing action. Coat and cure in under an hour! Operates on standard 120v / 60Hz household current. Versatility with two settings for improved coverage. High 25,000-volt setting for multi-coat coverage over larger areas. Color-Coded cables for easy setup. More trigger-room for additional comfort. Clear bottle allows you to see powder color, level and fluidizing action. Larger internal passages for improved powder flow. Refined power supply for more consistent coverage and powder-build. Eastwood Powder Coating Accessories Kit. This accessories kit comes with the items you need to start powder coating. The high temperature tape and silicone plugs make it easy to mask areas you do not want to get powder on. The safety wire is great for hanging parts on your powder coating rack or oven.

This kit also comes with an in-line air filter to keep contaminates out of your gun and powder. Also included is an 8 oz. Bottle of high gloss black powder and extra storage bottles. 15KV/25KV dual voltage output New and improved ground clamp provides a better ground Color coordinated cabling for easier setup New clear bottle makes it easy to see powder level and fluidizing action Additional 1/2 of trigger room makes it easier and more comfortable to use.

33278 Eastwood PCS-250 Dual Voltage Powder Coating Gun 10078 Eastwood Hi Temp Silcone Plugs Assortment Of 30 10198B Eastwood Hotcoat Powder Coat Bottle And Lid Replacement Set 3 Pak 16307 Eastwood HotCoat® Powder Coat High Gloss Jet Black - 8oz 16322 Eastwood HotCoat® 1/2 Inch x 36 yd Fiberglass High Temp Masking Tape 31635 Eastwood Air In Line Air Filter 43045 Safety Wire.